DRILLING ENGINEERING
ACARA
09 – 11 Maret 2020 | Rp 7.950.000/ peserta di Bandung
13 – 15 April 2020 | Rp 7.950.000/ peserta di Bandung
18 – 20 Mei 2020 | Rp 7.950.000/ peserta di Bandung
Jadwal Training 2020 Selanjutnya …
ABOUT THE DRILLING ENGINEERING COURSE
Gives a general introduction to the concepts and terminology used to drill wells for oil- and gas production. It explains the geological boundary conditions and relevant properties of rock. Furthermore the drilling process is explained in a step by step manner. Process knowledge is then combined with a review of the type of surface and downhole equipment, which is typically used to drill state of the art wells.
DESIGNED FOR
New Drilling Engineers, Petroleum Engineers, Reservoir Engineers, Geologists, Geophysicists, Service Company Specialist Engineers (Cementing, Logging, Testing, Drilling Fluids, Drill Bits, Surface Facilities), Drilling Contractor Staff, Business Development Managers, Field Service Managers, R&D Engineers, etc.
YOU WILL LEARN
Participants will learn:
- Understanding of the geological setting and boundary conditions where the well is going to be drilled.
- Knowledge about the drilling environment and combining the well requirements defined by geologist
- How the well design process is conducted, includes the planning of the well path to reach a certain subsurface target from a defined surface location together with the design of the well construction with casing and cementing program.
DRILLING ENGINEERING TRAINING MATERIAL OUTLINE
- Overview
- The overall drilling process and equipment
- The language of drillers – understanding their terminology
- Understanding the abbreviations and acronyms associated with drilling
- Rig equipment and types
- Types of drill bits
- Drill strings
- Drilled solids management
- Mud tank arrangements
- Drilling fluid properties
- Well control
- Cementing
- Casing design
- Hole problems (stuck pipe, lost circulation)
- Well control
- Directional drilling operations and tools
- Safety
- Introduction to Formation Evaluation Techniques
- MWD & LWD
- Geosteering
- Perforating Techniques
- Well Completion
- Suspension
- Abandonment Techniques.
- Drilling Fluids Technology
- Composition and properties of water-based drilling fluids
- Analysis of API water-base mud and non-aqueous drilling fluid report
- Identification and treatment of drilling fluid contaminants
- Composition and properties of water-based and non-aqueous drilling fluid systems
- Selection of water phase salinity for borehole stability
- API water-based and non-aqueous drilling mud tests
- Adjustment of non-aqueous drilling fluid properties
- Managing invert emulsion fluid systems: rig preparation and displacement
- Non-aqueous drilling fluids designed for environmental compliance
- Drilling Practices
- Planning including requirements for the completion and testing, AFE preparation
- HSE at the rig site
- Cost control, evaluating alternative drilling methods and maximizing penetration rate
- Hole cleaning, sloughing shale, lost circulation, stuck pipe and fishing operations
- Drilling fluids
- Lifting capacity of drilling fluids, pressure losses in the circulating system and ECD
- Maximizing hydraulics in the planning phase and at the rig
- Bit selection and application
- Casing and drill string design, selection of casing seats, BOP equipment
- Cement, cement additives and displacement mechanics
- Deviation control, directional drilling and horizontal drilling
- Pressure control, routine and special problems
- Project post analysis
- Fundamentals of Casing Design
- Function of casing and tubing strings
- Data needed for a design
- Uncertainty in data
- Industry standards, specifications and documentation
- Casing point selection
- Casing and tubing design
- Design approaches and design factors
- Loads and load assumptions
- Theories of strength
- API well design specifications
- Yield and ultimate strength
- Failure criteria
- Connections
- Special problems like thermal effects, buckling, casing wear, HPHT well design,
- wellhead growth, reliability based design and annular pressure buildup
- Primary Cementing
- Manufacture and chemistry of oil well cement: chemistry of portland cement, basic classification of API cements, essential properties of API cements, cement additives (accelerators, retarders, extenders, weighting agents, dispersants, fluid loss control agents etc.) and their related properties, selection of cement additives to control API cement properties.
- Laboratory testing and evaluation of cement properties: chemical analysis, density, viscosity, API water loss, free water requirement, thickening and setting time, set cement strength (permeability, porosity, tensile and compressive strength) etc.
- Cementing jobs – planning and quality control: calculation of hole and cement volumes, hydraulic optimization of slurry displacement (determination of slurry properties and displacement velocities); blending, mixing and displacement of cement slurry; selection of appropriate casing hardware and equipment; quality control measures for each phase of cementing.
- Execution, monitoring and evaluation of cement jobs: rig preparation for running casing and cementing, selection and assembly of casing hardware and running of casing, handling and running of cement slurry, and evaluation of cement quality by hydraulic testing and cement bond logs.
- Special cement system design and operation: thixotropic cement, expansive cement, ultra light cement, heavy weight cement, gas check cement, thermal cement, cement for corrosive environment, freeze protective cements, salt cements etc., practical solutions to commonly encountered problems; and local case studies.
- Cement job planning and evaluation for deviated and horizontal wells: horizontal well classification and application, determination of cementing parameters for effective mud displacement (cement and mud properties, fluid circulation, pipe movement, cable wipers, centralizers, pre-flush, spacer fluid properties etc.), cement job operation and evaluation.
- Managing Wellsite Operations
- Critical elements of effective planning and management of drilling operations
- Design and implement a program “checklist” for critical well drilling operations
- Investigate various elements of a drilling operation and mitigate visible and hidden risk
- Investigate and perform an analysis of trouble time events, non-productive time occurrences and invisible lost time for a drilling operation
- Dissect the drilling plan and apply total task analysis to wellsite activities
- Enhance your knowledge of organizational learning systems and transfer lessons learned
- Perform technical limit analysis to improve wellsite performance
- Measure and performance monitoring of the drilling operation
- Maximize the inexperienced resources through total task analysis in a case study to reduce drilling costs and improve safety
INSTRUCTOR : Dr.-Ing. Bonar Tua Halomoan Marbun and Team
VENUE : Bandung (Golden Flower, Banana Inn, Serela, Gino Feruci), Amaroossa Hotel, Noor Hotel, Grand Setiabudi Hotel, dll
TRAINING DURATION : 3 days
- 09 Mar 2020-11 Mar 2020
- 13 Apr 2020-15 Apr 2020
- 18 Mei 2020-20 Mei 2020
- 08 Jun 2020-10 Jun 2020
- 13 Jul 2020-15 Jul 2020
- 10 Agust 2020-12 Agust 2020
- 14 Sep 2020-16 Sep 2020
- 12 Okt 2020-14 Okt 2020
- 09 Nop 2020-11 Nop 2020
- 14 Des 2020-16 Des 2020
INVESTMENT PRICE/PERSON :
- Rp. 7.950.000/person (full fare) or
- Rp. 7.750.000/person (early bird, payment 1 week before training) or
- Rp. 7.500.000/person (if there are 3 persons or more from the same company)
FACILITIES FOR PARTICIPANTS:
- Training Module
- Flash Disk contains training material
- Certificate
- Stationeries: NoteBook and Ballpoint
- T-Shirt
- Backpack
- Training Photo
- Training room with Full AC facilities and multimedia
- Lunch and twice coffeebreak every day of training
- Qualified Instructor
- Transportation for participants from hotel of participants to/from hotel of training – VV (if minimal participants is 4 persons from the same company)
INTRODUCTION TO DRILLING ENGINEERING